Changing The Link Band; Figure 6-10 Change Or Addb - Radwin 2000+ SERIES User Manual

Changing the Link Band
Link Configuration: Maximum Information Rate
You can set separately, the uplink and downlink Maximum Information Rate (MIR) in Mbps or
leave it as Unlimited. The MIR acts as a throttle; leaving the uplink or downlink as Unlimited
commits the link to operating at best effort.
VLAN and Quality of Service
These services are covered respectively in VLAN Functionality and Quality of Service.
6.3.3 Changing the Link Band
Changing the Band in use is always carried out at the link level (not per installed radio unit).
To change the Link Band you must be logged on to the RT‐A(HBS) as Installer. In Installer
mode, the Tools drop‐down menu has an extra function, Change Band.

To change the Link Band:
1. Click Change Band. A list of available Bands is displayed:
Figure 6‐10: Change or Add Bands
2. Select the required Band and click OK. For our purposes, we choose 5.720‐5.960
GHz Universal. The band is highlighted and right button is enabled.
RADWIN 2000+ Series User Manual Release 4.2.40 6‐21