Figure 7-17 Restore Factory - Radwin 2000+ SERIES User Manual

Management
An Auto Detect feature is provided, whereby the line speed and duplex mode are detected
automatically using auto‐negotiation. Use manual configuration when attached external
equipment does not support auto‐negotiation. The default setting is Auto Detect.
The icon next to the CRC error count may be clicked to reset the counter to zero.
Do not reconfigure the port that is used for the managing computer
connection, since a wrong configuration can cause a management
disconnection or Ethernet services interruption.

To configure the Ethernet Mode:
• In the Ethernet Ports Configuration pane, use the drop‐down menus to choose the
required modes.
Operations
Figure 7‐17: Restore Factory Settings, License Activation and Change ODU Mode
RADWIN 2000+ Series User Manual Release 4.2.40 7‐26