Table of Contents
Advertisement
Activating the RT‐A(HBS)
Observe that the right hand spin‐wheel
left Other enabled, you could have chosen a frequency by working through those
available in 5MHz increments.
8. Choose the required Channel Bandwidth:
For the RADWIN 2000 C+, RADWIN 2000 D+, and RADWIN 2000i, choose
at least 40 MHz Channel Bandwidth to enable the supported net
aggregate capacity.
The RADWIN 2000+ Series has Dynamic Bandwidth Selection: If you choose the
maximum value available for the bandwidth, the link may dynamically switch
between the maximum value and values as low as 20MHz to ensure the best
RADWIN 2000+ Series User Manual
right hand selector wheel
is no longer displayed. Had you
Release 4.2.40
6‐7
Advertisement
Table of Contents
