HSSoE Concepts
Using discovery at the HSS master, you can select only those HSS clients in the HSS master's
domain; when configuring a new HSS client you may use discovery to pick the correct HSS
master.
VLAN
VLAN is used to separate sync frames from traffic so as to give sync frames highest priority. If
you have collocated ODUs running close to full capacity, failure to do so, would result in
excessive jitter and dropped traffic frames.
By default, the VLAN ID 1997 and priority 7 are reserved for HSS. You may change the VLAN ID
but not the priority.
RADWIN 2000+ Series User Manual
Release 4.2.40
11‐3