Mounting The Idu-H/Hp And Radwin 2000I; Figure 4-29 Flat - Radwin 2000+ SERIES User Manual

Mounting the IDU‐H/HP and RADWIN 2000i
Figure 4‐29 shows a mounted antenna. Attach the mounting bolt to the side of the adaptor
with the recess, as shown.
Figure 4‐29: Flat Panel antenna ‐ mounted to a pole
Grounding an external antenna
Groud external antennas using a suitable Grounding Kit such as an Andrew Type 223158‐2
(http://www.commscope.com).
4.7.3 Mounting the IDU‐H/HP and RADWIN 2000i
Indoor units are installed on a 19in rack, or on almost any other convenient location located
indoors, such as a table.
Mounting the IDU‐H/HP
The IDU‐H/HP takes up half of a rack width. Use the small mounting ear on one side, and the
large mounting ear on the other side to mount this unit (see Figure 4‐30). A single IDU‐H/HP
mounted on a 19 in rack is shown in Figure 4‐31.
RADWIN 2000+ Series User Manual Release 4.2.40 4‐20