Figure 8-1 Get Diagnostics - Radwin 2000+ SERIES User Manual

Retrieving Link Information
Table 8‐1: Get Diagnostics Data and Description (Continued)
Data
Link Information
Site Configuration
Monitor
Active Alarms
Service Configuration
Performance Monitor
Spectrum Analysis

To get diagnostics:
1. Click the Get Diagnostics button:
Figure 8‐1: Get Diagnostics window
2. Select or deselect the data options. If the file is to be sent to RADWIN Customer
Service leave all options checked.
3. Click File Path to specify the file name and older in which you want to save the file
and then click Run to save the information.
On completion, the status of the checked items is confirmed:
RADWIN 2000+ Series User Manual
Description
Information about the RT‐A(HBS) and RT‐B(HSU) settings
Data about the site parameters
Detailed event data record
Active Alarms are raised for any event affecting availability or
Settings: MIMO, Tx Ratio, MIR, VLAN, QoS
Network performance data over defined time periods ‐ ‐ every 15
For RT‐A(HBS), selected RT‐B(HSU)s and general interference
Release 4.2.40 8‐2