Radwin Gsu; Figure 4-40 External Connections : Idu-H/Hp - Radwin 2000+ SERIES User Manual

RADWIN GSU
Figure 4‐40: External Connections: IDU‐H/HP
4.8.6 RADWIN GSU
The GSU is used when GPS synchronization is needed, but when the radio unit does not have
an internal GPS capability.
The RADWIN GSU is not needed for the RADWIN 2000i.
The GSU's external connections are shown in Figure
• Ground: Ground cable is attached to the ground lug
• Antenna: RF cable connects to the GPS antenna
• Sync: If you are not using the IDU‐H/HP to connect the radio units when using GPS
hub site synchronization, use this port to connect the ethernet switch. If you are
using the IDU‐H/HP (recommended), this port is not needed.
• Power (IDU): The IDU port provides both a power and network connection from a
PoE device via a CAT‐5e cable.
• Network (IDU): The IDU port provides both a power and network connection from a
PoE device via a CAT‐5e cable.
RADWIN 2000+ Series User Manual
4‐41.
Release 4.2.40 4‐27