Sync Status Messages And Color Codes; Figure 10-7 Setting Rt-A(Hbs) - Radwin 2000+ SERIES User Manual

Sync Status Messages and Color Codes
Figure 10‐7: Setting RT‐A(HBS) as Hub Sync Master or Hub Sync Client
Continue Tx means that the RT‐A(HBS) as a client will continue to work even if there is no HSS
synchronization pulse.
If you select Hub Sync Master and click Apply, the Configuration display changes:
Figure 10‐8: RT‐A(HBS) as Hub Site Master
Setting up the RT‐A(HBS) as a client is carried out in a similar manner.
10.5 Sync Status Messages and Color Codes
The possible External Pulses conditions are shown in the following table:
RADWIN 2000+ Series User Manual Release 4.2.40 10‐7