Configuring Ghss With An Internal Gps Unit - Radwin 2000+ SERIES User Manual

Configuring GHSS with an Internal GPS Unit
12.4.3 Configuring GHSS with an Internal GPS Unit
With GHSS, all base stations (RT‐A(HBS) units) are HSS Clients, with the GPS satellite signal
being the master. RT‐B(HSU) units are always independent units (INU).
1. Log on to the RT‐A(HBS).
2. Open the Configure | Hub Site Sync tab:
Figure 12‐6: HSS Settings window ‐ GHSS
3. Check Enabled. The bottom part of the window in Figure
soon change the Protocol from Ethernet to GPS).
RADWIN 2000+ Series User Manual
12‐6 is enabled (you will
Release 4.2.40 12‐10