Management
To make any of the following changes, you must be logged on as user admin. The SNMPv3
passwords for admin and operator are as follows:
Table 7‐2: SNMPv3 predefined users
User Name
Password
admin
netwireless
operator
netpublic
To add an SNMPv3 user:
1. Click the right hand edit icon on any empty line of the list:
2. An Edit window is displayed:
Figure 7‐6: Add or Edit a user
3. Enter a user name and password. Confirm the password as indicated.
4. Choose a Profile:
• Read Only provides Observer level log‐on access.
• Read Write provides Operator level log‐on access
• Disabled stores the user details in the data base for future use. It must be
changed to Read Only or Read Write to become usable.
RADWIN 2000+ Series User Manual
Profile
Read Write
Read Only
Release 4.2.40
7‐13