Settings - ABB RED615 Technical Manual

Section 7
Condition monitoring functions
7.1.7
Table 527: SSCBR Non group settings
Parameter
Operation
Acc stop current
Open alarm time
Close alarm time
Table continues on next page
620
Name
PRES_ALM_IN
PRES_LO_IN
SPR_CHR_ST
SPR_CHR
RST_IPOW
RST_CB_WEAR
RST_TRV_T
RST_SPR_T
Table 526: SSCBR Output signals
Name
TRV_T_OP_ALM
TRV_T_CL_ALM
SPR_CHR_ALM
OPR_ALM
OPR_LO
IPOW_ALM
IPOW_LO
CB_LIFE_ALM
MON_ALM
PRES_ALM
PRES_LO
OPENPOS
INVALIDPOS
CLOSEPOS

Settings

Values (Range) Unit
1=on
5=off
5.00...500.00 A
0...200 ms
0...200 ms
Type Default Description
BOOLEAN 0=False Binary pressure alarm input
BOOLEAN 0=False Binary pressure input for lockout indication
BOOLEAN 0=False CB spring charging started input
BOOLEAN 0=False CB spring charged input
BOOLEAN 0=False Reset accumulation energy
BOOLEAN 0=False Reset input for CB remaining life and operation
counter
BOOLEAN 0=False Reset input for CB closing and opening travel times
BOOLEAN 0=False Reset input for the charging time of the CB spring
Type Description
BOOLEAN CB open travel time exceeded set value
BOOLEAN CB close travel time exceeded set value
BOOLEAN Spring charging time has crossed the set value
BOOLEAN Number of CB operations exceeds alarm limit
BOOLEAN Number of CB operations exceeds lockout limit
BOOLEAN Accumulated currents power (Iyt),exceeded alarm
limit
BOOLEAN Accumulated currents power (Iyt),exceeded
lockout limit
BOOLEAN Remaining life of CB exceeded alarm limit
BOOLEAN CB 'not operated for long time' alarm
BOOLEAN Pressure below alarm level
BOOLEAN Pressure below lockout level
BOOLEAN CB is in open position
BOOLEAN CB is in invalid position (not positively open or
closed)
BOOLEAN CB is in closed position
Step Default
1=on
0.01 10.00
1 40
1 40
1YHT530004D05 D
Description
Operation Off / On
RMS current setting below which engy
acm stops
Alarm level setting for open travel time in
ms
Alarm level Setting for close travel time
in ms
Technical Manual
615 series