Editing String Values; Editing Enumerated Values; Committing Settings - ABB REX610 Operation Manual

2NGA000823 A
4.11.2
4.11.3
4.12
REX610
Operation Manual
higher limit. The symbol in front of the value is ↕, when the previous value is
shown.
REX610
↕+_2
Edit group:
Active group=1
GUID-F4032493-0788-4A2E-8191-DC577EE2BB5F V1 EN-US
Figure 22: Restoring the previous value

Editing string values

1. Activate the setting mode and select a setting.
When editing string values, the cursor moves to the first character.
2.
Press or to change the value of an active character.
One press changes the value by one step.
3.
Press or to move the cursor to another character.
•
To insert characters or space, press simultaneously
•
To delete characters, press simultaneously

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press or to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific
order.

Committing settings

Editable values are stored either in RAM or in non-volatile flash memory. Values
stored in flash memory are in effect also after reboot.
Some parameters have an edit-copy. If editing is cancelled, the values with an edit-
copy are immediately restored to the original value. The values without an edit-
copy, such as string values, are restored to the original value only after a reboot
even though the edited value is not stored in the flash memory.
! A
and
Section 4
Using local HMI
and .
.
35