ABB RED615 Technical Manual page 58

Section 3
Basic functions
Table 21: IEC 61850-8-1 MMS settings
Parameter
Unit mode
Table 22: Modbus settings
Parameter
Serial port 1
Parity 1
Address 1
Link mode 1
Start delay 1
End delay 1
Serial port 2
Parity 2
Address 2
Link mode 2
Start delay 2
End delay 2
MaxTCPClients
TCPWriteAuthority
EventID
TimeFormat
ClientIP1
ClientIP2
ClientIP3
ClientIP4
ClientIP5
Table continues on next page
52
Values (Range) Unit
1=Primary
0=Nominal
2=Primary-Nominal
Values (Range) Unit
0=Not in use
1=COM 1
2=COM 2
0=none
1=odd
2=even
1...255
1=RTU
2=ASCII
0...20 char
0...20 char
0=Not in use
1=COM 1
2=COM 2
0=none
1=odd
2=even
1...255
1=RTU
2=ASCII
0...20
0...20
0...5
0=No clients
1=Reg. clients
2=All clients
0=Address
1=UID
0=UTC
1=Local
Step Default
0=Nominal
Step Default
0=Not in use
2=even
1
1=RTU
4
3
0=Not in use
2=even
2
1=RTU
4
3
5
2=All clients
0=Address
1=Local
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
1YHT530004D05 D
Description
IEC 61850-8-1 unit mode
Description
COM port for Serial interface 1
Parity for Serial interface 1
Modbus unit address on Serial interface 1
Modbus link mode on Serial interface 1
Start frame delay in chars on Serial
interface 1
End frame delay in chars on Serial
interface 1
COM port for Serial interface 2
Parity for Serial interface 2
Modbus unit address on Serial interface 2
Modbus link mode on Serial interface 2
Start frame delay in chars on Serial
interface 2
End frame delay in chars on Serial
interface 2
Maximum number of Modbus TCP/IP
clients
Write authority setting for Modbus TCP/
IP clients
Event ID selection
Time format for Modbus time stamps
Modbus Registered Client 1
Modbus Registered Client 2
Modbus Registered Client 3
Modbus Registered Client 4
Modbus Registered Client 5
Technical Manual
615 series