ABB RED615 Technical Manual page 37

1YHT530004D05 D
615 series
Technical Manual
Function
Tap changer control with voltage regulator
Synchronism and energizing check
Condition monitoring
Circuit-breaker condition monitoring
Trip circuit supervision, instance 1
Trip circuit supervision, instance 2
Current circuit supervision
Fuse failure supervision
Protection communication supervision
Runtime counter for machines and devices
Measurement
Disturbance recorder
Three-phase current measurement, instance 1
Three-phase current measurement, instance 2
Sequence current measurement, instance 1
Sequence current measurement, instance 2
Residual current measurement, instance 1
Residual current measurement, instance 2
Three-phase voltage measurement
Residual voltage measurement
Sequence voltage measurement
Three-phase power and energy measurement
RTD/mA measurement
Frequency measurement
1) One of the following can be ordered as an option: admittance-based E/F or harmonics-based E/F.
The option is an addition to the existing E/F of the original configuration. The optional E/F has also a
predefined configuration in the IED. The optional E/F can be set on or off. Note: The existing E/F of
the configuration, (DEFx), is always present in the configuration even if it is an option in the order
code sheet.
2) Multi-purpose protection is used for example for. RTD/mA-based protection
IEC 61850 IEC 60617
OLATCC1 COLTC
SECRSYN1 SYNC
SSCBR1 CBCM
TCSSCBR1 TCS (1)
TCSSCBR2 TCS (2)
CCRDIF1 MCS 3I
SEQRFUF1 FUSEF
PCSRTPC1 PCS
MDSOPT1 OPTS
RDRE1 -
CMMXU1 3I
CMMXU2 3I(B)
CSMSQI1 I1, I2, I0
I1I(B), I2I(B),
CSMSQ2
I0I(B)
RESCMMXU1 Io
RESCMMXU2 Io(B)
VMMXU1 3U
RESVMMXU1 Uo
VSMSQI1 U1, U2, U0
PEMMXU1 P, E
XRGGIO130 X130 (RTD)
FMMXU1 f
Section 1
Introduction
IEC-ANSI
90V
25
CBCM
TCM (1)
TCM (2)
MCS 3I
60
PCS
OPTM
-
3I
3I(B)
I1, I2, I0
I1I(B), I2I(B),
I0I(B)
In
In(B)
3U
Vn
U1, U2, U0
P, E
X130 (RTD)
f
31