ABB RED615 Technical Manual page 52

Section 3
Basic functions
Parameter
Amplitude corr. B
Amplitude corr. C
Division ratio
Voltage input type
Table 10: Analog input settings, residual voltage
Parameter
Secondary voltage
Primary voltage
Amplitude corr.
Table 11: Authorization settings
Parameter
Local override
Remote override
Local viewer
Local operator
Local engineer
Local administrator
Remote viewer
Remote operator
Remote engineer
Remote administrator
1) Authorization override is disabled, LHMI password must be entered.
2) Authorization override is enabled, LHMI password is not asked.
3) Authorization override is disabled, communication tools ask password to enter the IED.
4) Authorization override is enabled, communication tools do not need password to enter the IED, except for WHMI which always requires it.
Table 12: Binary input settings
Parameter
Threshold voltage
Input osc. level
Input osc. hyst
46
Values (Range) Unit
0.900...1.100
0.900...1.100
1000...20000
1=Voltage trafo
3=CVD sensor
Values (Range) Unit
60...210 V
0.100...440.000 kV
0.900...1.100
Values (Range) Unit
1)
0=False
2)
1=True
3)
0=False
4)
1=True
Values (Range) Unit
18...176 Vdc
2...50 events/s
2...50 events/s
Step Default
0.001 1.000
0.001 1.000
1 10000
1=Voltage trafo
Step Default
1 100
0.001 11.547
0.001 1.000
Step Default
1=True
1=True
0
0
0
0
0
0
0
0
Step Default
2 78
1 30
1 10
1YHT530004D05 D
Description
Phase B Voltage phasor magnitude
correction of an external voltage
transformer
Phase C Voltage phasor magnitude
correction of an external voltage
transformer
Voltage sensor division ratio
Type of the voltage input
Description
Secondary voltage
Primary voltage
Amplitude correction
Description
Disable authority
Disable authority
Set password
Set password
Set password
Set password
Set password
Set password
Set password
Set password
Description
Binary input threshold voltage
Binary input oscillation suppression
threshold
Binary input oscillation suppression
hysteresis
Technical Manual
615 series