ABB RED615 Technical Manual page 884

Section 15
IED and functionality tests
878
Description
• Common mode
• Differential mode
Emission tests:
• Conducted, RF-emission
(mains terminal)
0.15-0.50 MHz
0.5-30 MHz
• Radiated, RF-emission
30-230 MHz
230-1000 MHz
Table 708: Insulation tests
Description
Dielectric tests
Impulse voltage test
Insulation resistance
measurements
Protective bonding resistance
Table 709: Mechanical tests
Description
Vibration tests (sinusoidal)
Shock and bump test
Seismic test
Type test value
300 V rms
150 V rms
< 79 dB(µV) quasi peak
< 66 dB(µV) average
< 73 dB(µV) quasi peak
< 60 dB(µV) average
< 50 dB(µV/m) quasi peak,
measured at 3 m distance
< 57 dB(µV/m) quasi peak,
measured at 3 m distance
Type test value
2 kV, 50 Hz, 1 min
500 V, 50 Hz, 1 min,
communication
5 kV, 1.2/50 μs, 0.5 J
1 kV, 1.2/50 μs, 0.5 J,
communication
>100 MΏ, 500 V DC
<0.1 Ώ, 4 A, 60 s
Reference
IEC 60068-2-6 (test Fc)
IEC 60255-21-1
IEC 60068-2-27 (test Ea shock)
IEC 60068-2-29 (test Eb bump)
IEC 60255-21-2
IEC 60255-21-3
1YHT530004D05 D
Reference
EN 55011
CISPR 11, Group 1, class A
Reference
IEC 60255-5 and
IEC 60255-27
IEC 60255-5 and
IEC 60255-27
IEC 60255-5 and
IEC 60255-27
IEC 60255-27
Requirement
Class 2
Class 2
Class 2
615 series
Technical Manual