Valve Clearance Adjustment - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
2
4
5
8
Workshop Manual Ed. 07-2012
SETTINGS AND ADJUSTMENTS
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Valve clearance adjustment

Remove saddle and tank as outlined in the relevant paragraphs.
- Remove the connector (1) from the coil (2).
1
- Loosen the two screws (3), remove coil (2) and retaining bracket (4), and
then remove the spark plug.
NOTE: During refitting, check that the gasket (5) is correctly positioned;
3
H10948
6
7
H10949
Loosen the four screws (8) of the head cover and remove the head cover (9).
9
8
H10950
the reference lug (6) must correspond with the retaining bracket
(4) gap (7).
D.6