Ignition And Starter System (Te-Txc) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
Key
1. Electronic control unit
2. Throttle position sensor
3. Coolant temperature sensor
4. Coil / Stick Coil
5. Pressure sensor
6. Fuel pump
7. Air temperature sensor
8. Spark plug
9. Lambda sensor
10. Cooling fan
ELECTRICAL SYSTEM
TXC 250R - 310R 2013 I.E. USA

Ignition and starter system (TE-TXC)

The engine injection and starter system is controlled by the control unit (ECU);
by means of a series of sensors, the ECU controls the status of the engine and
of the surrounding environment at each given moment.
These are : a crankshaft position sensor (pick-up), an ambient air temperature
sensor in filter box and a group of sensors providing information relating to pres-
sure, air temperature and butterfly valve opening position.
Moreover, the ECU uses a lambda probe for the constant adjustment of the air-
fuel ratio (Euro3 mode).
13
10
12
14
2
8
6
15
4
9
3
11
5
7
11. Injector
12. DC relay
13. L.H. switch
14. Fuses
15. Power relay
16. Battery
17. Solenoid starter
18. Starter motor
19. Voltage regulator
20. Alternator
M.21
1
16
20 19 18 17
Workshop Manual Ed. 07-2012
TE
H11469