Front Braking System Bleeding (Te, Tc, Txc) - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Table of Contents

Available languages

Brake fluid quickly ruins painted surfaces;

any spilled fluid should be completely

wiped up immediately.

* Brake fluid may cause irritation. Avoid

contact with skin or eyes. In case of contact,

flush thoroughly and call a doctor if your

eyes were exposed.

Periodically check the connecting hoses (see

"Periodical maintenance card"): if the

hoses (A) and (B) are worned or cracked,

their replacement is advised.

FRONT BRAKING SYSTEM BLEEDING (TE, TC, TXC)

The braking system must be bled after the fluid replacement or

when, due to air in the circuit, the lever stroke is long and

Proceed as follows:

- Remove the rubber cap on the bleeding valve (1).

- Attach a clear plastic hose to the bleeding valve on the brake

caliper and turn the other end of the hose into a container

(make sure that the end of the hose is submerged in brake

fluid during the entire bleeding operation).