Chain Slider Removal - Husqvarna TC 449 2011 I.E. Workshop Manual

TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
1
2
5
4
6
4
5
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Chain slider removal

- Remove chain and gear shift pedal as indicated in the relevant para-
graphs.
- Loosen screw (2), and remove chain guard (1).
- Fit a support under the engine so that the rear wheel is raised off the
ground.
H02482
H02517
- Loosen lower screw (3) using two 14 mm wrenches.
- Loosen the three screws (4) (with a 8 mm wrench) securing chain slider (5)
to swinging arm (6).
H02483
6
H02484
E.35
Workshop Manual Ed. 03-2012