Chain Slider Removal - Husqvarna TC449 Workshop Manual

1
2
5
4
6
4
5
GENERAL PROCEDURES

Chain slider removal

- Remove chain and gear shift pedal as indicated in the relevant para-
graphs.
- Loosen screw (2), and remove chain guard (1).
- Fit a support under the engine so that the rear wheel is raised off the
ground.
H02482
H02517
- Loosen lower screw (3) using two 14 mm wrenches.
- Loosen the three screws (4) (with a 8 mm wrench) securing chain slider (5)
to swinging arm (6).
H02483
6
H02484
E.32
1 edition (08-2010) _Rev. 11-2010
st