Slider Removal; Kick Start Disassembly - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
ENGINE DISASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Slider removal

- Use a 5 mm Allen wrench to loosen the screw (1) and remove the slider (2).

Kick start disassembly

- Release the spring (1) from the casing (2) and remove the complete shaft
assembly (3). Be careful not to lose the washer (11) located on the crankcase.
F.24