Enable Password - Planet WGSW-28040 Command Manual

Switch# show username
Priv | Type | User Name | Password
------+--------+--------------------+------------------------
01 | secret | | dnXencJRwflV6
15 | secret | admin | FzjrGO6vfbERY
15 | secret | test | 7p57T9yMkViSUS

4.4.12 enable password

Command:
enable [privilege <0-15>] (password | secret) WORD<0-32>
no enable [privilege <0-15>]
Parameter:
privilege <0-15>
password
WORD<0-32>
secret
WORD<0-32>
Default:
Default enable password for all privilege levels are "".
Mode:
Global Configuration
Usage Guide:
Use "enable password" command to edit password for each privilege level for enable authentication. And use "no
enable" command to restore enable password to default empty value.
The only way to show this configuration is using "show running-config" command.
Example:
This example shows how to edit enable password for privilege level 15
Switch(config)# enable secret enblpasswd
Specify the privilege level to configure. If no privilege level is specified, default is 15.
Specify password string and make it not encrypted.
Specify password string and make it encrypted.
Command Guide of WGSW-28040
75