Mirror; Mirror Session - Planet WGSW-28040 Command Manual

Command:
show mac address-table aging-time
Mode:
Privileged EXEC
Usage Guide:
Use the show mac address-table aging-time command in EXEC mode to display the aging time for dynamic mac
entries.
Example:
This example shows how to display aging time of dynamic mac address entry
Switch# show mac address-table aging-time
Mac Address Table aging time: 300 sec

4.16 Mirror

4.16.1 mirror session

Command:
mirror session <1-4> source interfaces IF_PORTS (both | rx | tx)
no mirror session <1-4> source interfaces IF_PORTS (both|rx|tx)
mirror session <1-4> source vlan <1-4094>
no mirror session <1-4> source vlan
mirror session <1-4> destination interface IF_NMLPORT [allow-ingress]
no mirror session <1-4> destination interface IF_NMLPORT
no mirror session (<1-4> | all)
Parameter:
<1-4>
Specify the mirror session to configure
Command Guide of WGSW-28040
215