Lldp Med Network-Policy Auto - Planet WGSW-28040 Command Manual

Example:
This example binds network policy for interface gi1 and gi2.
Switch(config)# show lldp med
Fast Start Repeat Count: 10
lldp med network-policy voice: auto
Network policy 1
-------------------
Application type: Voice Signaling
VLAN ID: 2 tagged
Layer 2 priority: 3
DSCP: 4
Network policy 32
-------------------
Application type: Conferencing
VLAN ID: 5 tagged
Layer 2 priority: 1
DSCP: 63
Switch(config)# interface range gi1,2
Switch(config-if-range)# lldp med network-policy add 1,32
Switch(config)# show lldp interfaces gi1,2 med
Port | Capabilities | Network Policy | Location | Inventory | POE
------ + ------------- + -------------- + -------- + ----------+ -----
gi1 | Yes | Yes | Yes | Yes | Yes
gi2 | Yes | Yes | Yes | Yes | Yes
Port ID: gi1
Network policies: 1, 32
Port ID: gi2
Network policies: 1, 32

4.13.16 lldp med network-policy auto

Command:
lldp med network-policy auto
no lldp med network-policy auto
Command Guide of WGSW-28040
189