Show Lldp Med - Planet WGSW-28040 Command Manual

4.13.21 show lldp med

Command:
show lldp med
show lldp interfaces IF_NMLPORTS med
Parameter:
IF_NMLPORTS
Mode:
Global Configuration
Privileged Configuration
Usage Guide:
The commands display the LLDP MED configuration information.
Example:
This example display the LLDP MED information.
Switch(config)# show lldp med
Fast Start Repeat Count: 10
lldp med network-policy voice: manual
Network policy 1
-------------------
Application type: Voice Signaling
VLAN ID: 2 tagged
Layer 2 priority: 3
DSCP: 4
Network policy 32
-------------------
Application type: Conferencing
VLAN ID: 5 tagged
Layer 2 priority: 1
DSCP: 63
Port | Capabilities | Network Policy | Location | Inventory | POE
------ + ------------- + -------------- + -------- + ----------+ -----
gi1 | Yes | Yes | Yes | Yes | Yes
gi2 | Yes | Yes | Yes | Yes | Yes
Specify the ports to display information
Command Guide of WGSW-28040
197