Planet WGSW-28040 Command Manual page 261

The default values of queue-cos are showing in the following table.
Queue ID
The default values of queue-dscp are showing in the following table.
Queue ID
The default values of queue-precedence are showing in the following table.
Queue ID
Mode:
Global Configuration
Usage Guide:
According to different trust type, packets will be assigned to different queue based on the specific qos map. For
example, if the trust type is trust cos, the device will get the cos value in packet and reference the cos-queue mapping
CoS
1 1
2 0
3 2
4 3
5 4
6 5
7 6
8 7
DSCP
1 0
2 8
3 16
4 24
5 32
6 40
7 48
8 56
DSCP
1 0
2 1
3 2
4 3
5 4
6 5
7 6
8 7
Command Guide of WGSW-28040
261