Spanning-Tree Max-Hops; Spanning-Tree Forward-Delay - Planet WGSW-28040 Command Manual

4.26.6 spanning-tree max-hops

Command:
spanning-tree max-hops <1-40>
Parameter:
<1-40>
Default:
spanning-tree max-hops = 20
Mode:
Global Configuration
Usage Guide:
This command configures the maximum hops value for MSTP. The configuration could be shown by "show
spanning-tree" command.
Example:
This example sets the max-hops to 15.
Switch# configure
Switch(config)# spanning-tree max-hops 15

4.26.7 spanning-tree forward-delay

Command:
spanning-tree forward-delay <4-30>
Parameter:
<4-30>
Default:
spanning-tree forward-delay = 15
Mode:
Global Configuration
Usage Guide:
Specify the max-hops value
Specify the forward-delay interval (second).
Command Guide of WGSW-28040
306