Show Lldp Statistics - Planet WGSW-28040 Command Manual

4.13.22 show lldp statistics

Command:
show lldp statistics
show lldp interfaces IF_NMLPORTS statistics
Parameter:
IF_NMLPORTS
Mode:
Global Configuration
Privileged Configuration
Usage Guide:
The commands display the LLDP RX/TX statistics.
Example:
This example display the LLDP statistics.
Switch(config)# show lldp statistics
LLDP Global Statistics:
Insertions : 3
Deletions : 0
Drops : 0
Age Outs : 1
| TX Frames | RX Frames | RX TLVs | RX Ageouts
Port | Total | Total | Discarded | Errors | Discarded | Unrecognized | Total
--------+-----------+-------+-----------+--------+-----------+--------------+----------
gi1 | 50 | 0 | 0 | 0 | 0 | 0 | 0
gi2 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi3 | 0 | 50 | 0 | 0 | 0 | 0 | 1
gi4 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi5 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi6 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi7 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi8 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi9 | 0 | 0 | 0 | 0 | 0 | 0 | 0
gi10 | 0 | 0 | 0 | 0 | 0 | 0 | 0
Specify the ports to display information
Command Guide of WGSW-28040
199