Tacacs Default-Config; Command Guide Of Wgsw - Planet WGSW-28040 Command Manual

4.2.7 tacacs default-config

Command:
tacacs default-config [key TACACSKEY] [timeout <1-30>]
Parameter:
key TACACSKEY
timeout <1-30>
Default:
Default tacacs+ key is "".
Default tacacs+ timeout is 5 seconds.
Mode:
Global Configuration
Usage Guide:
Use "tacacs default-config" command to modify default values of tacacs+ server. These default values will be used
when user try to create a new tacacs+ server and not assigned these values.
Example:
This example shows how modify default tacacs+ configuration
Switch(config)# tacacs default-config timeout 20
Switch(config)# tacacs default-config key tackey
This example shows how to show default tacacs+ configurations.
Switch# show tacacs default-config
Timeout | Key
--------+---------
10 | tackey
This example shows how to create a new tacacs+ server with above default config and show results.
Switch(config)# tacacs host 192.168.1.111
Switch# show tacacs
Prio | Timeout | IP Address | Port | Key
------+---------+------------------+--------+----------
Specify default tacacs+ server key string
Specify default tacacs+ server timeout value

Command Guide of WGSW-28040

44