Planet WGSW-28040 Command Manual page 41

Parameter:
LISTNAME
Default:
Default enable authentication list for each line is "default".
Mode:
Line Configuration
Usage Guide:
Different access methods are allowed to bind different enable authentication lists. Use "enable authentication"
command to bind the list to specific line (console, telnet, ssh).
Use no form to bind the "default" list back.
Example:
This example shows how to create a new enable authentication list and bind to telnet line.
Switch(config)# aaa authentication enable test1 tacacs+ radius enable
Switch(config)# line telnet
Switch(config-line)# enable authentication test1
This example shows how to show line binding lists.
Switch# show line lists
Line Type | AAA Type | List Name
-------------+-----------------+-----------------
console | login | default
| enable | default
| exec | default
| commands | default
| accounting-exec | default
telnet | login | default
| enable | test1
| exec | default
| commands | default
| accounting-exec | default
ssh | login | default
| enable | default
| exec | default
| commands | default
| accounting-exec | default
Specify the login authentication list name to use.
Command Guide of WGSW-28040
41