Show Ip Dhcp Snooping Database - Planet WGSW-28040 Command Manual

Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts : 1
Successful Transfers : 1 Failed Transfers : 0
Successful Reads : 1 Failed Reads : 0
Successful Writes : 0 Failed Writes : 0
switch# show ip dhcp snooping binding
Bind Table: Maximun Binding Entry Number 192
Port | VID | MAC Address | IP | Type | Lease Time
--------+------+---------------------+---------------------------------------+---------------------+-----------
fa1 | 1 | 00:30:4F:C7:12:62 | 192.168.1.100(255.255.255.255)|DHCP Snooping | 86400

4.6.20 show ip dhcp snooping database

Command:
show ip dhcp snooping database
Mode:
Global Configuration
Usage Guide:
Use the show ip dhcp snooping database command to show settings of DHCP Snooping agent.
Example:
The example shows how to show settings of DHCP Snooping agent.
switch(config)# show ip dhcp snooping database
Type : tftp: 192.168.1.50
FileName : backup_file
Write delay Timer : 300 seconds
Abort Timer : 60 seconds
Agent Running : Running
Delay Timer Expiry : 300 seconds
Abort Timer Expiry : 299
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Command Guide of WGSW-28040
117