Planet WGSW-28040 Command Manual page 225

[no] ipv6 mld snooping vlan <VLAN-LIST> static-router-port IF_PORTS
[no] ipv6 mld snooping vlan <VLAN-LIST> forbidden-router-port IF_PORTS
Parameter:
VLAN-LIST
IF_PORTS
Default:
None static/forbidden router ports
Mode:
Global Configuration
Usage Guide:
'ipv6 mld snooping vlan 1 static-router-port gi1-2' will add static router port gi1-2 for vlan 1.
'ipv6 mld snooping vlan 1 forbidden-router-port gi2' will add forbidden router port gi2 for vlan 1.
This will also remove gi2 from static router port. The forbidden router port received query will not forward.
The configure can use show ipv6 mld snooping router.
Example:
This example shows how to set ipv6 mld snooping static/forbidden.
Switch(config)# ipv6 mld snooping vlan 1 static-router-port gi1-2
Switch(config)# ipv6 mld snooping vlan 1 forbidden-router-port gi2
Switch# show ipv6 mld snooping router
Dynamic Router Table
VID | Port | Expiry Time(Sec)
------+---------+------------------
Total Entry 0
Static Router Table VID | Port Mask
------+------------------------
1 | gi1
Total Entry 1
Forbidden Router Table
VID | Port Mask
------+------------------------
1 | gi2
Total Entry 1
specifies VLAN ID list to set
specifies a port list to set or remove
Command Guide of WGSW-28040
225