4.20.5 shutdown
Command:
shutdown
no shutdown
Mode:
Interface Configuration
Usage Guide:
Use "shutdown" command to disable port and use "no shutdown" to enable port. If port is error disabled by some
reason, use "no shutdown" command can also recovery the port manually.
Example:
This example shows how to modify port duplex configuration.
Switch(config)# interface gi1
Switch(config-if)# shutdown
This example shows how to show current admin state configuration
Switch# show running-config interfaces gi1
interface gi1
shutdown
4.20.6 jumbo-frame
Command:
jumbo-frame <64-9216>
Parameter:
<64-9216>
Default:
Default maximum frame size is 1522.
Specify the maximum frame size.
Command Guide of WGSW-28040
251