Planet WGSW-28040 Command Manual page 313

name NAME
revision <0-65535>
instance <0-15> vlan [ VLAN-LIST ]
Parameter:
NAME
<0-65535>
<0-15>
VLAN-LIST
Default:
name (Switch's MAC address)
revision 0
instance 0 vlan all
Mode:
Global Configuration
Usage Guide:
This command configures the MSTP Configuration ID. The configuration could be shown by "show spanning-tree mst
configuration" command.
Example:
This example sets MSTP Configuration ID, name to `Region1`, revision to `123` and VLAN 100 mapped to instance 1.
Switch# configure
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# name Region1
Switch(config-mst)# revision 123
Switch(config-mst)# instance 1 vlan 100
Switch(config-mst)# exit
Switch(config)# exit
Switch# show spanning-tree mst configuration
Name [Region1]
Revision 123 Instances configured 2
Instance Vlans mapped
-------- ---------------------------------------------------------------------
0 1-99,101-4094
Specify the MSTP bridge name of MST Configuration ID.
(Max. 32 chars)
Specify the MSTP revision number of MST Configuration ID.
Specify the MST instance ID.
Specify the VLAN list to be mapped to this specified instance.
Command Guide of WGSW-28040
313