Switchport Forbidden Vlan; Management-Vlan - Planet WGSW-28040 Command Manual

4.29.15 switchport forbidden vlan

Command:
switchport forbidden vlan ( add | remove ) VLAN-LIST
Parameter:
( add | remove )
VLAN-LIST
Mode:
Port Configuration
Usage Guide:
The command per port configures the membership of the specfied VLANs to forbidden. The configuration could be
shown by "show interface switchport" command.
Example:
This example sets the membership of the VLAN 100 with port fa10 to forbidden
Switch# configure
Switch(config)# interface gi10
Switch(config-if)# switchport forbidden vlan add 100

4.29.16 management-vlan

Command:
management-vlan vlan <1-4094>
no management-vlan
Parameter:
<1-4094>
Default:
management VLAN = VLAN 1
Add or remove forbidden membership.
Specify the VLAN list.
Specify the VLAN ID of management-vlan.
Command Guide of WGSW-28040
340