Use no form to delete the existing list. However, "default" list is not allowed to remove.
Example:
This example shows how to add a login authentication list to authenticate with order tacacs+, radius, local.
Switch(config)# aaa authentication login test1 tacacs+ radius local
This example shows how to show existing login authentication lists
Switch# show aaa authentication login lists
Login List Name | Authentication Method List
-----------------+-------------------------------
default | local
test1 | tacacs+ radius local
This example shows how to add an enable authentication list to authenticate with order tacacs+, radius, enable.
Switch(config)# aaa authentication enable test1 tacacs+ radius enable
This example shows how to show existing enable authentication lists
Switch# show aaa authentication login lists
Enable List Name | Authentication Method List
-----------------+-------------------------------
default | enable
test2 | tacacs+ radius enable
4.2.2 login authentication
Command:
login authentication LISTNAME
no login authentication
Command Guide of WGSW-28040
36