Gvrp; Gvrp (Port) - Planet WGSW-28040 Command Manual

4.9 GVRP

4.9.1 gvrp
Command:
gvrp
no gvrp
Default:
no gvrp
Mode:
Global Configuration
Usage Guide:
'no gvrp' will clear all dynamic vlan entry. do not learn vlan.
The configure can use 'show gvrp'.
Example:
The following example specifies that set global gvrp test.
Switch(config)# gvrp
Switch# show gvrp
GVRP Status
--------------------
GVRP : Enabled
Join time : 200 ms
Leave time : 600 ms
LeaveAll time : 10000 ms

4.9.2 gvrp (port)

Command:
Gvrp
Command Guide of WGSW-28040
131