Spanning-Tree Mst Priority; Spanning-Tree Mst Cost - Planet WGSW-28040 Command Manual

1 100
-------------------------------------------------------------------------------

4.26.18 spanning-tree mst priority

Command:
spanning-tree mst <0-15> priority <0-61440>
Parameter:
<0-15>
<0-61440>
Default:
spanning-tree mst = 0 ; priority = 32768
Mode:
Global Configuration
Usage Guide:
This command configures the MST instance priority. The configuration could be shown by "show spanning-tree mst"
command.
Example:
This example sets the priority of MST instance 1 to 4096.
Switch# configure
Switch(config)# spanning-tree mode mstp
Switch(config)# spanning-tree mst 1 priority 4096

4.26.19 spanning-tree mst cost

Command:
spanning-tree mst <0-15> cost <0-200000000>
Parameter:
Specify the MST instance ID to configure.
Specify the bridge priority, it must multiples of 4096.
Command Guide of WGSW-28040
314