Planet WGSW-28040 Command Manual page 120

length
land-deny
nullscan-deny
pod-deny
smurf-deny
smurf-netmask
syn-sportl1024-
deny
synfin-deny
synrst-deny
tcp-frag-off-min-ch
eck
tcpblat-deny
tcphdr-min-check
tcphdr-min-length
udpblat-deny
xma-deny
Default:
Default enable state of all DoS types are enabled.
Default smurf netmask length is 0.
Default tcphdr-min length is 20.
Default icmp-ping-max length is 512.
Default ipv6-min-frag-size length is 1240.
Mode:
Global Configuration
Usage Guide:
DoS is using to protect malicious attack from other devices. This command can configure DUT to enable/disable
following types of attacks.
daeqsa-deny : Destination MAC equals to source MAC

icmp-frag-pkts-deny : Fragmented ICMP packets

icmp-ping-max-length : DoS information

icmpv4-ping-max-check : Check ICMPv4 ping maximum packets size

icmpv6-ping-max-check : Check ICMPv6 ping maximum packets size

ipv6-min-frag-size-check : Check minimum size of IPv6 fragments

ipv6-min-frag-size-length : DoS information

land-deny : Source IP equals to destination IP

nullscan-deny : NULL Scan Attacks

pod-deny : Ping of Death Attacks

Enable/Disable land-deny protection.
Enable/Disable nullscan-deny protection.
Enable/Disable pod-deny protection.
Enable/Disable smurf-deny protection.
Specify smurf netmask.
Enable/Disable syn-sportl1024-deny protection.
Enable/Disable synfin-deny protection.
Enable/Disable synrst-deny protection.
Enable/Disable tcp-frag-off-min-check protection.
Enable/Disable tcpblat-deny protection.
Enable/Disable tcphdr-min-check protection.
Specify tcphdr-min length.
Enable/Disable udpblat-deny protection.
Enable/Disable xma-deny protection.
Command Guide of WGSW-28040
120