Planet WGSW-28040 Command Manual page 275

ets)
<1-2147483647>
(absolute|delta)
<0-2147483647>
<0-65535>
<0-2147483647>
<0-65535>
(rising|rising-falling
|falling)
[owner NAME]
Mode:
Global Configuration
Usage Guide:
Use the rmon event command to add or modify a RMON event entry. Before add alarm entry, at least one event
entry must be added. Use the no form of this command to delete.
Example:
The example shows how to add RMON alarm entry that sample interface fa1 packets delta count every 300 seconds.
Trigger event index 1 if over than rising threshold 10000, trigger event index 2 if lower than falling threshold.
You can verify settings by the following show rmon alarm command.
switch(config)# rmon event 1 log
switch(config)# rmon event 2 log
switch(config)# show rmon event all
Rmon Event Index : 1
Rmon Event Type : Log
Rmon Event Community :
Rmon Event Description :
Rmon Event Last Sent :
Rmon Event Owner :
Rmon Event Index : 2
Rmon Event Type : Log
Rmon Event Community :
Rmon Event Description :
Rmon Event Last Sent :
Rmon Event Owner :
Switch(config)# rmon alarm 1 interface gi1 pkts 300 delta rising 10000 1 falling 100 1
Specify the time in seconds that the alarm monitors the MIB variable
Specify absolute to compare sample counter absolutely.
Specify delta to compare delta counter between samples
Specify a number which the alarm trigger rising event
Specify event index when the rising threshold exceeds.
Specify a number which the alarm trigger falling event
Specify event index when the falling threshold exceeds.
Specify only to how rising or falling startup event. Or show either rising or falling startup
event.
(Optional) Specify owner of alarm.
Command Guide of WGSW-28040
275