Dhcp Snooping; Ip Dhcp Snooping; Ip Dhcp Snooping Vlan - Planet WGSW-28040 Command Manual

4.6 DHCP Snooping

4.6.1 Ip dhcp snooping

Command:
ip dhcp snooping
no ip dhcp snooping
Default:
DHCP snooping is disabled
Mode:
Global Configuration
Usage Guide:
Use the ip dhcp snooping command to enable DHCP Snooping function. Use the no form of this command to disable.
Example:
The example shows how to enable DHCP Snooping on VLAN 1. You can verify settings by the following show ip dhcp
snooping command.
switch(config)# ip dhcp snooping
switch(config)# ip dhcp snooping vlan 1
switch(config)# show ip dhcp snooping
DHCP Snooping : enabled
Enable on following Vlans : 1
circuit-id default format: vlan-port
remote-id: : 00:11:22:33:44:55 (Switch Mac in Byte Order)

4.6.2 ip dhcp snooping vlan

Command:
ip dhcp snooping vlan VLAN-LIST
Command Guide of WGSW-28040
102