Error Messages and Codes
NVRAM Error
Applicable Chain Link
Initial Actions
3-148
When the printer is turned On, the error is detected between the NVRAM size
required by the system and its actual size.
Chain Link
116-390: ESS NVRAM1 Size and ID Check Fail
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step
Actions and Questions
1. Check the Image Processor Board
1
for correct installation.
2. Is the Image Processor Board
correctly installed?
Does the error still occur?
2
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Replace the
Image
Processor Board
(page 8-87).
Phaser 6280 Color Laser Printer Service Manual
No
Reseat the
Image
Processor
Board
(page 8-87).
Complete.