Door A Open - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Door A Open

Applicable Chain Link
Initial Actions
3-134
The Front Cover is open.
Chain Link 077-300: IOT Front Cover Open
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Front Cover Assy., PL1.2.1
Interlock Assy. Harness, PL9.1.3
MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Front Cover for damage.
2. Are there any damages on the Front
Cover Assembly?
Check the Interlock Switch for
2
operation.
1. Perform the Interlock Switch test
(page 4-31): Service Mode
Engine Diag > Sensor Test
Interlock Switch.
2. Does number on the Control Panel
increase by one when the Front
Cover is operated?
1. Replace the Interlock Assembly
3
Harness (page 8-79).
2. Does the error still occur?
Wiring and Plug/Jack Map References
Yes
Replace the
Front Cover
Assembly
(page 8-16).
Replace the
MCU Board
(page 8-86).
>
>
Replace the
MCU Board
(page 8-86).
Phaser 6280 Color Laser Printer Service Manual
No
Go to step 2.
Go to step 3.
Complete.