Main Motor Error - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Main Motor Error

Applicable Chain Link
Initial Actions
3-120
The Main Motor has failed.
Chain Link 042-325-01: IOT Motor Failure
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Main Drive Assembly, PL8.1.2
MCU Board, PL9.1.20
Right Side Harness, PL10.1.15
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the detailed error code (press
1
the Up and Down buttons
simultaneously).
2. Does code "00" display on the
Control Panel?
1. Check the Transfer Unit, Fuser, and
2
Black Print Cartridge for correct
installation.
2. Are the parts seated correctly?
3 Does the error still occur?
Wiring and Plug/Jack Map References
"Map 1 - Electrical and Drive" on
page 10-9
"Map 4 - LVPS and MCU Boards" on
page 10-12
"Main Drive" on page 10-25
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Phaser 6280 Color Laser Printer Service Manual
No
Refer to "Sub
Motor Error" on
page 3-122
Refer to "Tray
2 (PH) Motor
Error" on
page 3-124
Refer to
"Optional
Feeder Motor
Error" on
page 3-126
Reseat the
following items:
Transfer Unit
(page 8-8)
Fuser
Assembly
(page 8-11)
Black Print
Cartridge
(page 8-10)
Go to step 2.
Complete.