Out Of Memory - Xerox Phaser 6280 Service Manual

Out of Memory

Phaser 6280 Color Laser Printer Service Manual
The printer memory is full and cannot continue to print. Print job requires
additional memory.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Memory Card (Option), PL9.1.30
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the required memory for the
1
print job.
2. Print a small size file (example as a
Windows test print).
3. Does the error still occur?
1. Reseat the memory card
2
(page 8-91).
2. Does the error still occur?
1. Check the memory card capacity.
3
Print the printer Configuration Page:
Menu
Configuration.
2. Does the memory meet the print job
requirements?
1. Replace the memory card
4
(page 8-91).
2. Does the error still occur?
016-718: Memory Overflow
Wiring and Plug/Jack Map References
> Information Pgs >
Error Messages and Codes
Yes No
Go to step 2. Add memory
card or separate
the print job.
Go to step 3. Complete.
Go to step 4. Replace the
Image
Processor
Board
(page 8-87).
Replace the Complete.
Image
Processor Board
(page 8-87).
3-97