Invalid Job - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Invalid Job

Applicable Chain Link
Initial Actions
3-102
Error occurs when the configuration of the printer for paper size/type does not
match the printer driver.
Chain Link 016-799: Invalid Job (Job Environment Violation)
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the paper size.
1
2. Does the paper meet the
specifications?
2 1. Check the paper size setup on the
Control Panel: Menu
> Tray 1/2/3 > Paper
2. Does the paper size match the paper
size setting?
1. Set the paper size in the Control
3
Panel to match the paper in the tray.
2. Does the error still occur?
Does the error still occur?
4
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Go to step 4.
> Tray Settings
Size.
Replace the
Image
Processor Board
(page 8-87).
Replace the
Image
Processor Board
(page 8-87).
Phaser 6280 Color Laser Printer Service Manual
No
Replace the
paper.
Go to step 3.
Complete.
Complete.