Optional 550-Sheet Feeder Error - Xerox Phaser 6280 Service Manual

Error Messages and Codes

Optional 550-Sheet Feeder Error

Applicable Chain Link
Initial Actions
3-130
The Optional 550-Sheet Feeder has failed.
Chain Link 072-215: IOT Option Feeder Failure
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL9.1.20
Right Side Harness, PL10.1.15
Feeder Unit Harness, PL12.2.3
Tray 3 Feeder Board, PL12.2.6
Optional 550-Sheet Feeder, PL12.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Optional 550-Sheet
Feeder for correct installation.
2. Is the Optional 550-Sheet Feeder
correctly installed?
Does the error still occur?
2
1. Check the wiring harness
3
connectors P/J28, P/J281, and P/
J419 between the MCU Board and
the Tray 3 Feeder Board.
2. Are the connectors securely
connected?
Does the error still occur?
4
5 Check the Feeder Unit Harness for
continuity.
1. Disconnect P/J419 from the Feeder
Board and P/J281 from the Right
Side Harness.
2. Check continuity between P/J419
<=> P/J281.
Wiring and Plug/Jack Map References
"Map 2 - Laser Unit, Feeder Assembly"
on page 10-10
"Map 4 - LVPS and MCU Boards" on
page 10-12
"Map 6 - Optional 550-Sheet Feeder" on
page 10-14
"Optional 550-Sheet Feeder Wiring
Diagram" on page 10-39
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 6.
Phaser 6280 Color Laser Printer Service Manual
No
Reseat the
Optional 550-
Sheet Feeder.
Go to step 2.
Complete.
Reconnect the
connectors.
Go to step 4.
Complete.
Replace the
Optional 550-
Sheet Feeder
(page 8-100).