Maintenance Function; Diagnostics - Xerox Phaser 6280 Service Manual

Maintenance Function

Firmware Update

Diagnostics

Phaser 6280 Color Laser Printer Service Manual
The Image Processor Board and Multi-Protocol Network Card firmware can
be updated by customers and service technicians using Windows PC or
Macintosh with dedicated utilities. Firmware updates are available at
www.xerox.com/office/6280support.
Detailed procedures are available in the "Firmware Update" on page A-3.
Note
Boot Code can be updated via USB port only.
Updated Firmware
Image Processor Board
MCU Board
* MCU Board cannot be updated when ROM starts to be used for MCU Board.
Two types of diagnostic functions are available:
1. Auto Diagnostics: The printer is checked when it is turned on. It is
checked whether hardware (ROM, RAM, ASIC, etc...) operates properly.
2. Manual Diagnostics: Only qualified service personnel can perform manual
diagnostics using the Service Mode in the Control Panel.
General Information
Windows
Via USB Via Network (port 9100)
Available Available
Available Available
1-29