Xerox Phaser 6280 Service Manual page 307

Phaser 6280 Color Laser Printer Service Manual
Service Diagnostic Test Table (continued)
Test Control Panel Display
Tone Correction Tone Correction
ON *
OFF
<Press the Up or Down
button to switch Tone
Correction On/Off>
<Press the Set button to
save the setting and
move one level up the
menu>
<Press the Cancel button
to move one level up the
menu without saving the
value>
Pixel Counter Pixel Counter
Y: nn.n
C: nn.n
M: nn.n
K: nn.n
<Press the Set or Cancel
button to move one level
up the menu>
Configuration Configuration
(Do not use -
Dip Switch0
for
00000000 *
Development
Dip Switch1
Only)
00000000 *
Dip Switch2
00000000 *
Dip Switch3
00000000 *
Counter Type Counter Type
Type1*
Type2
Type3
Type4
<Press the Up or Down
button to change counter
type>
<Press the Set button to
save the setting>
<Press the Cancel button
to move one level up the
menu>
General Troubleshooting
Test Description
Controls TRC in conjunction with
process control to keep the printer
density constant. This function is
implemented to turn Off tone
correction control in case correction
exceeds the limit due to machine-to-
machine variation.
Sets the printer Tone Correction mode
On/Off.
Note: When the Tone Correction has
been changed, an "*" is displayed next
to the text.
Note: This information can be
initialized by Initialize NVM
Menu > Admin Menu > Maintenance
Mode > Initialize NVM).
Displays the ratio (% used) of the
number of pixel per C/M/Y/K counted
by the Controller to A4 size area except
4 mm area from the edge on the last
page print.
100% = empty print cartridge
The value is rounded off to one decimal
place.
For B/W print, only K is displayed.
The ranges are from 0-100% for each
color (CMYK).
Operates the DIP switch on NVRAM of
the Controller.
Available values are 0 and 1.
Note: This information is initialized by
Clear All NVM.
Sets counter type from 1-4.
Note: When the Counter Type has been
changed, an "*" is displayed next to
the text.
(Printer
4-19